Accuray Incorporated (Sunnyvale CA, U.S.A.)
Design of electron injectors for medical linear accelerators
|
Advanced Safety Concepts (Albuquerque NM, U.S.A.)
Three-dimensional models of capacitive sensors for smart airbag
deployment in automobiles.
|
Alpha Magnetics Corporation (Hayward CA, U.S.A.)
Design studies for large magnets for semiconductor crucibles.
|
Ametek-Chandler Engineering (Broken Arrow OK, U.S.A.)
Torque calculations for a rotary vacuum feedthrough.
|
Archimedes Technology (San Diego CA, U.S.A.)
Review of electron-gun gun designs for material vaoprization in a magnetic isotope separator.
|
Bechtel Nevada Corporation (Los Alamos NM, U.S.A.)
Electron gun and focusing system design for a compact pulsed X-ray source
|
Beth-Israel Deaconess Medical Center (Boston MA, U.S.A.)
Computational
support for the development of a database to guide clinical work on RF
ablation of tumors.
|
Chemical Industry Institute of Toxicology (Research Triangle Park NC, U.S.A.)
Calculations of electrostatic forces on dielectric particles in electrostatic
precipitators for pollution abatement.
|
Davis Instrument Corporation (Hayward CA, U.S.A.)
Calculation of magnetic forces on a permanent magnet bearing.
|
Ethicon Incorporated (Somerville NJ, U.S.A.)
Development of software for coupled electrothermal simulations.
|
General Electric Healthcare (Milwaukee WI, U.S.A.)
Determination heat loading on the window of a rotating-target X-ray source from electron backscatter.
|
Genetronics Incorporated (San Diego CA, U.S.A.)
Simulations of 3D electric field distributions created by phased
electroporation needle arrays.
|
HTH Incorporated (Winter Park, FL U.S.A.)
Cost reduction and force optimization of a permanent-magnet clamp for mobile applications.
|
IAE SpA (Cormano, Italy)
Custom modifications to TDiff to model rotating X-ray targets.
|
Inficomm Incorporated (The Woodlands, TX U.S.A.)
Develop models and strategies for through-tubing electrical power and communications for permanent downhole gauges in oil wells.
|
Innosys Incorporated (Salt Lake City UT, U.S.A.)
Planar electron gun and beam transport system for microwave generation.
|
Ionatron Incorporated (Tucson AZ, U.S.A.)
Three-dimensional electrode design for an electrostatic detection system
|
KTEC Corporation (Albuquerque NM, U.S.A.)
Modeling complex pulsed power convolutes using shape import from Solidworks.
|
Lawrence Livermore National Laboratory (Livermore CA, U.S.A.)
Develop new
concepts and software tools for compact electron diodes for flash
radiography.
|
Los Alamos National Laboratory (Los Alamos NM, U.S.A.)
Creation of advanced codes to model materials at high temperature and pressure
(AGEX program).
|
Los Alamos National Laboratory (Los Alamos NM, U.S.A.
Three-dimensional time-domain electromagnetic code with non-linear dielectrics for soliton generation
|
Los Alamos National Laboratory (Los Alamos NM, U.S.A.)
Three-dimensional codes to design injectors for high-power relativistic
electron beams (DARHT program).
|
Los Alamos National Laboratory (Los Alamos NM, U.S.A.)
Development of
concepts to generate and to transport thin electron beams for high-
frequency, high-power microwave generation.
|
Marresearch GmbH (Norderstedt, Germany)
Concepts for and design of electron guns to generate non-circular focused beams.
|
MIT Plasma Science and Fusion Center (Cambridge MA, U.S.A.)
Advanced code capabilities to model planar guns for intense electron beams.
|
Mountain Technology (Normandy, TN, U.S.A.)
Magnetically-insulated electron gun design for a 95 GHz gyrotron.
|
NASA/ASRC Aerospace (Kennedy Space Center FL, U.S.A.)
Feasibility studies - electrostatic radiation shield for a lunar base
|
National Institute of Science and Technology (Gaithersburg MD, U.S.A.)
SBIR Phase II contract to develop software to interpret results from near-field
optical microscopes.
|
National Securities Technologies LLC (Las Vegas, NV. U.S.A.)
Studies to determine optimal paths for a pulsed radiographic accelerator facility.
|
Naval Surface Warfare Center (Dahlgren, VA. U.S.A.)
Developed concepts for magnetically-insulated high-power microwave sources and carry out benchmark simulations.
|
Northstar Research Corporation (Albuquerque NM, U.S.A.)
Three-dimensional design of steering magnets for large-area scan systems.
|
QM Technologies (Albuquerque NM, U.S.A.)
Magnetic field distributions and charged particle orbits in
intense ion injectors for implantation and material processing.
|
Sandia National Laboratories (Albuquerque NM, U.S.A.)
Simulations of transport and material interactions in an electron-beam-heated supersonic wind tunnel
|
Science Applications International Corporation (San Diego CA, U.S.A.)
Evaluation of compact betatrons for detection of hazardous materials.
|
Science Applications International Corporation (Albuquerque NM, U.S.A.)
Support for a program sponsored by the Office of Naval Research to create a standard code for modeling high-power electron-beam microwave devices.
|
Schlumberger-Doll Research Center (Ridgefield CN, U.S.A.)
Methods to improve performance of high-voltage photocathode X-ray
assemblies.
|
SPEC Incorporated (Boulder CO, U.S.A.)
Detector concept for electric-field measurements in hurricanes.
|
Still River Systems (Littleton MA, U.S.A.)
Modeling ion beam dynamics in a high-field cyclotron.
|
SUNY (Stonybrook NY, U.S.A.)
Custom software to calculate induced electric fields in complex structures for bone regeneration.
|
ThermoFisher Scientific (Franklin MA, U.S.A.)
Three-dimensional template solutions for beam optics in an X-ray source.
|
University of California (Davis, CA, U.S.A.)
Set up template solutions for the design of a planar-beam, high-power klystron.
|
University of Tokyo (Tokyo, Japan)
Orbit analyses for antiprotons extracted from a magnetic trap.
|
Valleylab Incorporated (Boulder CO, U.S.A.)
Development of
2D/3D software to simulate electrosurgery procedures.
|
Virginia Accelerators Corporation (Alexandria VA, U.S.A.)
Design of large-area rod cathode arrays in electron irradiators
for flue gas treatment.
|
Visuray LLC (Katy TX, U.S.A.)
Studies of the effects of misalignment on a high-voltage X-ray tube.
|